It’s finally here! No more boring naming routines when creating target image files. With the newest TaskForce firmware update, use highly customizable and flexible templates instead. Set up a template once, and then create complex subfolder paths and file names with a couple of clicks, according to your internal naming Read more…
How to spend less time clearing the backlog? And which forensic file format to use for the maximum acquisition speed? Those questions are not easy to answer. But OK, challenge accepted! Let’s measure and find out! If you’re into spoilers, jump to the “Final Results” part. If not, read on. Read more…
At last! The newest version of TaskForce firmware introduces an improved RAID module with support for Synology NAS systems, Btrfs, and LVM (Logical Volume Manager), along with other top-shelf features such as the ability to group ports in Express mode and assign different imaging settings for each group. Also, we’ve Read more…
iSCSI network protocol allows remote access to physical or logical devices. In the DFIR domain, it is primarily used for imaging drives that are soldered into a motherboard, working servers that couldn’t be turned off, or devices for which you have legal warrant to access but not seize. In the Read more…
A new software update for Atola Insight Forensic is ready for download! Version 5.5 brings support for the iSCSI protocol and makes it possible to image drives that are soldered into a motherboard, working servers that couldn’t be turned off, or devices for which you have legal warrant to access Read more…
You remember segmented hashes, right? They’re what you want to use to verify an image of a damaged drive: after multipass imaging of a damaged drive in TaskForce, these hashes are calculated only for the good areas of a drive. Segmented hashing also does its job when the classic linear Read more…
Using some TaskForce features more often than others and want them at hand? Now, with TaskForce 2023.11 firmware update, you can customize your Taskbar as you like to have quicker access to the functionality you use the most. And hide features you rarely utilize under the Others button. It is Read more…
And there it comes! A long-awaited support for RAID 6 is finally here with new firmware updates for Atola TaskForce and TaskForce 2. Now you can automatically detect, reassemble, and image that popular RAID type, even with two missing members. New updates also bring more convenience when working with NVMe Read more…
We are happy to announce a new firmware update for Atola Insight Forensic. For version 5.4, we’ve thoroughly overhauled our Disk Editor module to make byte-level analysis much easier. The new update also includes more than 35 new features and bugfixes. And, a nice bonus: Insight Forensic can now detect Read more…
Three… Two… One… Launch! Five years after the release of TaskForce, our hard-working forensic imager, we’re launching its advanced version – Atola TaskForce 2. And we can’t wait to tell you about all the improvements that make TaskForce 2 a next-level imager. The new generation of TaskForce brings more ports, Read more…